Copper is just great. It’s easy to cut and it looks good. Today I’m gonna show you how I made this DIY candlestick.
You need, copper tube 22mm, six 90 degree elbows, a pipe cutter and E-6000 glue. I’ve bought the pipe and elbows at Clas Ohlson and I got the glue from eBay. Cut the pipe into three 9 cm (3.5 in) pieces, two 3cm (1.2 in) pieces and one 18cm (7.1 in) piece.
Assemble the candlestick as shown on the photo below and make sure it’s straight. If you are pleased with the result, then glue it together. It takes about 20 minutes for the glue to set so make sure the long piece stays in place all that time.